Milling

Mafell FM 1000 (230VAC)

Mafell FM 1000 (230VAC)The FM 1000 is a new milling motor, made by the German company MAFELL. This motor is Kress-compatible: a 43mm clamping collar and the same type of collets. This motor generates less noise and offers a compelling concentricity, since the armature and spindle are produced in one piece. The motor comes with a 6mm collet and spanner.
Mafell FM 1000 (230VAC)
£ 200.00 (ex. vat)

Kress FME 1050-P

Kress FME 1050-P
£ 250.00 (ex. vat)

Kress FME 1050-1

Kress FME 1050-1Kress Milling Motor. Max RPM 25,000 with quick lock connector.
Kress FME 1050-1 5000-25000 RPM
£ 200.00 (ex. vat)configurator

STEPCRAFT HF spindle

STEPCRAFT HF spindleThe STEPCRAFT HF spindle system has been specifically designed with the STEPCRAFT machine in mind. The 500 Watt HF spindle systems are a compact and light with an asynchronous motor to provide the torque. There are three internal ball bearings to maintain concentricity. The spindle are supplied with a small air pump that provides positive pressure from the spindle casing outwards...
SC HF 500 Watt Spindle
£ 435.00 (ex. vat)configurator

Industrial quality small HF spindle

Industrial quality small HF spindleIndustrial quality HF spindle system that will run on an LPT connector to control the on/off and spindle speed functionality. This spindle can be controlled with the STECRAFT machine directly if the correct adaptor cable is also purchased. This spindle is self cooling, fully balanced and has double angle contact bearings of very high quality...
Industrial quality small HF spindle
£ 639.00 (ex. vat)configurator

STEPCRAFT adaptor cable for Industrial quality HF spindle

STEPCRAFT adaptor cable for Industrial quality HF spindleThe small industrial HF spindle system uses 25pin LPT input connection to control the speed and on/off. This cable plugs directly into the STEPCRAFT machine and will allow spindle speed control and on off from the UCCNC control software
STEPCRAFT adaptor cable for Industrial quality HF spindle
£ 25.00 (ex. vat)

Configurator