Mounting adaptors

Right angle adaptor for HF and KRESS

Right angle adaptor for HF and KRESSallows kress and HF spindles to be mounted at right angles on a machine with a 43mm mounting collar.
Right angle adaptor for HF and KRESS
£ 80.00 (ex. vat)

Spindle Mount (spare part) for DeWalt

Spindle Mount (spare part) for DeWaltSpindle Mount (spare part) for DeWalt
Spindle Mount (spare part) for DeWalt
£ 25.00 (ex. vat)

Quick release adaptor

Quick release adaptorThe STEPCRAFT quick release adaptor is to provide a quicker method to remove and install the tools that are mounted into the 43mm mounting collar of the STEPCRAFT system
Quick release adaptor
£ 6.00 (ex. vat)

Proxxon mounting adaptor

Proxxon mounting adaptorSTEPCRAFT proxon mounting adaptor. The proxxon mounting adaptor fits the 43mm mounting collar and allows the proxxon spindle to be mounted into the machine. Adaptor is a 43mm to 20mm adaptor for the STEPCRAFT.
Proxxon mounting adaptor
£ 11.00 (ex. vat)

Donek Mount for STEPCRAFT 1/4 inch

Donek Mount for STEPCRAFT 1/4 inchThis adaptor allows the Donek Knives (D3 and D4) to be mounted into the STEPCRAFTs 43mm mounting collar. Or indeed any CNC router with a mounting collar.
Donek Drag Knife STEPCRAFT mount
£ 15.00 (ex. vat)

Dremel mounting adaptor

Dremel mounting adaptorThe STEPCRAFT mounting adaptor 43mm to M19 x 2mm thread is designed to mount a dremel into the STEPCRAFT machine
43mm to M19 x 2mm thread Dremel
£ 11.00 (ex. vat)

Proxxon right angle adaptor

Proxxon right angle adaptorThe Proxxon right angles adaptor (90 degree) allows the proxxon to me mounted horizontally in the machine. The adaptor fits into the 43mm mounting collar and the Proxxon 20mm head fits into the fixture at right angles. This fixture is useful to engraving large aspect ratio workpieces for example. The side of a chopping board can be engraved as an example...
Proxxon right angle adaptor
£ 25.00 (ex. vat)

43mm to M18 x 1.5mm thread adaptor

43mm to M18 x 1.5mm thread adaptor43mm to M18 x 1.5mm thread adaptor for STEPCRAFT
43mm to M18 x 1.5mm thread adaptor
£ 11.00 (ex. vat)

43mm to 33mm adaptor

43mm to 33mm adaptor43mm mounting collar to 33mm tool adaptor for the STEPCRAFT CNC system
43mm to 33mm adaptor for STEPCRAFT
£ 11.00 (ex. vat)

20mm to 8mm adaptor

20mm to 8mm adaptor
£ 8.00 (ex. vat)

20mm to M18 x 1.5mm adaptor

20mm to M18 x 1.5mm adaptor20mm to M18 x 1.5mm adaptor
20mm to M18 x 1.5mm adaptor
£ 7.00 (ex. vat)

20mm to M19 x 2 mm (Dremel)

20mm to M19 x 2 mm (Dremel)Adaptor 20mm to M18 x 2 mm Dremel. You can use the proxxon adaptor - and mount the Dremel in the proxxon adaptor using this adaptor.
20mm to M19 x 2mm
£ 8.00 (ex. vat)

Configurator