Aluminium polyethylene Series L X W

the tables are made of an Aluminium/polyethylene/Aluminium sandwich. The suction holes are 0.3mm diameter into the zones in the table. As a result with the correct pump you do not need to cover all of the table in order to get good results. The pump choice is very important for good performancew. The tables are made such that the lower plate can be bolted to the Tslot / other and then table can then be bolted to the top of the mounted plate. 1) bolt plate to machine 2) mount table

Component features:
  • Aluminium, Polyetheylene Construction
  • Height 29mm
  • Hole spacings 10mm x 10mm
  • Holes into vacuum chamber 0.3mm
  • Hose connections to table: 10mm standard OD
  • Rubber adaptor mat included
  • NOTE: pump selection is important. Hoovers can give good performance but WARNING: Overheating possible causing fire hazard - best solution is specific vacuum pump
  • ___________________________
  • CONTENTS
  • 1 x vacuum table
  • 1 x rubber mat with holes spacings the same as the table
  • 1 x cover mat
  • 1 x set of connecting tubes to large gland for duct connection
200 x 200 mm table
£ 95.00 (ex. vat)configurator
300 x 200 mm table
£ 125.00 (ex. vat)configurator
450 x 300 mm table
£ 195.00 (ex. vat)configurator
600 x 400 mm table
£ 285.00 (ex. vat)configurator
1000 x 600 mm table
£ 660.00 (ex. vat)configurator
Videos:
  • youtube video

  • youtube video

  • youtube video

  • youtube video

  • youtube video

  • youtube video

Configurator