V groove

90 degree v cutter

90 degree v cutter
90 degree 8mm shank 12.5mm head
£ 24.00 (ex. vat)

De burring V bits

6mm Vbit 90degree
£ 22.00 (ex. vat)
8mm Vbit 90degree
£ 25.00 (ex. vat)
10mm Vbit 90degree
£ 27.00 (ex. vat)
12mm Vbit 90degree
£ 30.00 (ex. vat)

20 degree V bit 1/4 inch shank

20 degree V bit 1/4 inch shank20 degree included angle V bit. Solid Carbide. 1/4 inch shank.
20 Degree V bit 1/4 inch shank
£ 20.00 (ex. vat)

60 degree V cutter 12.7mm diam

60 degree V cutter 12.7mm diam60 degree sign writing tool for detailed and deep engraving. The lines left by smaller engraving bits can be eliminated by this tool as the total diameter at the top of the V is 12.7mm.
60 degree V cutter 12.7mm diam
£ 35.00 (ex. vat)

Counter sink V cutter 1/8th inch shank

Counter sink V cutter 1/8th inch shankCarbide counter sink V cutter. The shanks are all 1/8th inch (3.175mm) and the cutting head diameter is 6.5mm. Excellent for engraving, countersinking and V cutting
60 Vcutter 6.5mm 1/8th inch shank
£ 22.00 (ex. vat)
90 Vcutter 6.5mm 1/8th inch shank
£ 22.00 (ex. vat)

Vcutter 1/8th inch shank

Vcutter 1/8th inch shankV cutters all with 1/8th inch shanke (3.175mm) Often used for chamfering of circuit boards, track engraving on circuit boards, small detailed engraving etc. Very sharp - careful of your fingers when handling and mounting into spindle.
30 degree Vbit 1/8th inch shank
£ 6.00 (ex. vat)
60 degree Vbit 1/8th inch shank
£ 6.00 (ex. vat)
90 degree Vbit 1/8th inch shank
£ 6.00 (ex. vat)

Configurator